U.S. Code of Federal Regulations

Regulations most recently checked for updates: Oct 03, 2024

§ 810.100 - Scope and purpose of this subpart.

(a) Section 202A(e) of the USMCA Implementation Act authorizes the Secretary, in cooperation with the Secretary of the Treasury, to participate in a verification of whether covered vehicle production complies with the high-wage components of the LVC requirements set forth in Article 7 of the Automotive Appendix or, if the producer is subject to the alternative staging regime, under Articles 7 and 8 of the Automotive Appendix. This subpart addresses calculation of the high-wage material and manufacturing expenditures component of the LVC (referred to in the Uniform Regulations as high-wage material and labor expenditures).

(b) The regulations in this subpart describe how producers can meet the high-wage-related aspect of the material and manufacturing expenditures component, which concerns whether workers engaged in direct production work at a plant or facility included in a producer's material and manufacturing expenditures calculation earn an average hourly base wage rate of at least US$16 per hour. All other aspects of material and manufacturing expenditures are addressed in the Uniform Regulations and regulations and/or guidance issued by CBP or other federal agencies.

§ 810.105 - Calculating the average hourly base wage rate.

(a) The average hourly base wage rate (also referred to in the USMCA as the production wage rate, and in the Uniform Regulations as the average base hourly wage rate) is calculated by dividing the total base wages paid for all hours worked in direct production at a plant or facility by the total number of hours worked in direct production at that plant or facility. The average hourly base wage rate must be at least US$16 per hour for the plant or facility to count toward a producer's LVC obligation.

(b) The three components of this calculation are computed as follows:

(1) Hourly base wage rate is the rate of compensation a worker is paid for each hour worked in direct production.

(i) Benefits, bonuses, premium payments, incentive pay, overtime premiums, and all other similar payments are excluded from the hourly base wage rate.

(ii) Amounts deducted from a worker's pay that are for the benefit of the worker and are reasonable may be included in the hourly base wage rate. The principles in determining whether deductions are for the benefit of the worker and are reasonable, and thus may be included as part of the hourly base wage rate, are explained in more detail in 29 CFR part 531.

(2) Hours worked in direct production means all time a worker spends personally involved in the production of passenger vehicles, light trucks, heavy trucks, or parts used in the production of these vehicles at a plant or facility located in a USMCA Country, or directly involved in the set-up, operation, or maintenance of equipment or tools used in the production of those vehicles or parts at that plant or facility. The total number of hours worked in direct production at a plant or facility, as referenced in paragraph (a) of this section, is calculated by adding together hours in direct production (as calculated under paragraphs (b)(2)(i) and (ii)) for all workers who perform direct production work at that plant or facility.

(i) Except for workers described in § 810.130, if at least 85 percent of a worker's total work hours are hours worked in direct production, the worker's total work hours are considered hours worked in direct production, and are included in the average hourly base wage rate calculation.

(ii) Except for workers described in § 810.130, if less than 85 percent of a worker's total work hours are hours worked in direct production, only the worker's hours worked in direct production are included in the average hourly base wage rate calculation.

(3) Total base wages is calculated using a two-step process. First, multiply each worker's hourly base wage rate (for the time period described in paragraph (d) of this section) by that worker's number of hours worked in direct production at that rate (for the same time period). Second, add the values calculated in step one to obtain total base wages paid for all hours worked in direct production at the plant or facility.

(c) The producer must include all hours worked in direct production at a plant or facility (other than by workers described in § 810.130) when calculating the average hourly base wage rate for that plant or facility. Where a worker is paid by a third party (such as a temporary employment agency), only the wages received by the worker are included in the average hourly base wage rate calculation.

(d) The producer must elect one of the following periods to calculate the average hourly base wage rate:

(1) The producer's previous fiscal year;

(2) The previous calendar year;

(3) The quarter or month to date in which the vehicle is produced or exported;

(4) The producer's fiscal year to date in which the vehicle is produced or exported; or

(5) The calendar year to date in which the vehicle is produced or exported.

§ 810.110 - Examples of direct production work.

(a) Direct production work includes production of passenger vehicles, light trucks, or heavy trucks, or parts for these vehicles, as well as the set-up, operation or maintenance of tools or equipment used in the production of those vehicles and parts. The work may take place on a production line, at a workstation, on the shop floor, or in another production area. Direct production work includes material handling of vehicles or parts; inspections of vehicles or parts, including inspections that are normally categorized as quality control and, for heavy trucks, pre-sale inspections carried out at the place where the vehicle is produced; on-the-job training regarding the execution of a specific production task; and maintaining and ensuring the operation of the production line or production area and the operation of tools and equipment used in the production of vehicles or parts, including the cleaning of the line or production area and the places around it.

(b) Except for workers described in § 810.130, time spent (by, for example, line supervisors and team leads) providing on-the-job training regarding the execution of a specific production task or relieving a worker in the performance of direct production duties is direct production work. Time spent managing or supervising workers is not direct production work.

§ 810.115 - Paid meal time and paid break time.

Paid meal time and paid break time are counted as direct production work for purposes of determining whether at least 85 percent of a worker's total work hours are hours worked in direct production. However, if less than 85 percent of a worker's total work hours are worked in direct production, paid meal time and paid break time are not included in the average hourly base wage rate calculation.

§ 810.120 - Part-time, temporary, seasonal, and contract workers.

(a) Part-time, temporary, and seasonal workers. Hours of part-time workers, temporary workers, and seasonal workers are treated the same as hours of full-time workers for purposes of calculating the average hourly base wage rate.

(b) Employees. The average hourly base wage rate calculation includes workers' hours regardless of whether the workers have an employment relationship with the producer.

§ 810.125 - Workers paid on a non-hourly basis.

(a) General. If any worker performing direct production work is compensated by a method other than hourly, such as a salary, piece-rate, or day-rate basis, the worker's hourly base wage rate shall be calculated by converting the salary, piece-rate, or day-rate to an hourly equivalent. This hourly equivalent is then multiplied by the number of hours worked in direct production for purposes of calculating the average hourly base wage rate.

(b) Examples. (1) Where the salary, piece-rate, or day-rate wage is paid to a worker on a weekly or bi-weekly pay period basis, the total salary, piece-rate, or day-rate compensation for that pay period will be divided by the total number of hours worked in the pay period to determine the hourly equivalent.

(2) Where the salary, piece-rate, or day-rate wage is paid to a worker on a semi-monthly pay period basis, the total salary, piece-rate, or day-rate compensation will be converted to a weekly equivalent by multiplying the compensation by 24 (semi-monthly pay periods in a year) and dividing by 52 (weeks per year). This weekly equivalent will be divided by the total number of hours worked in the week to determine the hourly equivalent.

(3) Where the salary, piece-rate, or day-rate wage is paid to a worker on a monthly pay period basis, the total salary, piece-rate, or day-rate compensation will be converted to a weekly equivalent by multiplying the compensation by 12 (monthly pay periods in a year) and dividing by 52 (weeks per year). This weekly equivalent will be divided by the total number of hours worked in the week to determine the hourly equivalent.

§ 810.130 - Executive, Management, Research and Development, Engineering, and Other Personnel.

The average hourly base wage rate does not include any hours worked by:

(a) Executive or management staff who generally have the authority to make final decisions to hire, fire, promote, transfer and discipline employees;

(b) Workers engaged in research and development; or

(c) Engineers, mechanics, or technicians, if such personnel are not responsible for maintaining and ensuring the operation of the production line or tools and equipment used in the production of vehicles or parts.

§ 810.135 - Interns, students, and trainees.

Hours worked by an intern, student, or trainee who does not have an express or implied compensation agreement with the employer are not considered hours worked in direct production, and therefore are not included in the average hourly base wage rate calculation.

§ 810.140 - High-wage transportation or related costs for shipping a high-wage part or material.

(a) High-wage transportation or related costs for shipping a high-wage part or material within the USMCA Countries may be used to calculate high-wage material and manufacturing costs if those costs are not otherwise included in the annual purchase value.

(b) Where the requirements of paragraph (a) of this section are met, the producer may claim in its calculation of high-wage material and manufacturing expenditures high-wage transportation or related costs for shipping a high-wage part or material within the USMCA Countries, for each transportation, logistics, or material handling provider that paid an average hourly base wage rate of at least US$16 per hour to its direct production workers performing these services. Such workers would include drivers and loaders.

§ 810.145 - Currency exchange.

The high-wage component of material and manufacturing expenditures (and assembly expenditures under § 810.300) is expressed in U.S. dollars—US$16 per hour. Rules governing currency exchange are set forth and addressed in the Uniform Regulations and regulations and/or guidance issued by the Department of the Treasury and/or CBP.

§ 810.150 - Adjustment of the average hourly base wage rate.

If the USMCA Countries agree to adjust the dollar amount of the average hourly base wage rate requirement, WHD will publish a notice of the adjusted rate in the Federal Register. The regulations in this part will apply with respect to the adjusted rate in the same manner they applied with respect to the US$16 per hour rate.