Code of Federal Regulations > Title 49 > Chapter I > Part 192 - PART 192—TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS

U.S. Code of Federal Regulations

Regulations most recently checked for updates: Oct 02, 2023

Subpart A [§ 192.1 - § 192.18] - Subpart A—General

Subpart B [§ 192.51 - § 192.69] - Subpart B—Materials

Subpart C [§ 192.101 - § 192.127] - Subpart C—Pipe Design

Subpart D [§ 192.141 - § 192.205] - Subpart D—Design of Pipeline Components

Subpart E [§ 192.221 - § 192.245] - Subpart E—Welding of Steel in Pipelines

Subpart F [§ 192.271 - § 192.287] - Subpart F—Joining of Materials Other Than by Welding

Subpart G [§ 192.301 - § 192.329] - Subpart G—General Construction Requirements for Transmission Lines and Mains

Subpart H [§ 192.351 - § 192.385] - Subpart H—Customer Meters, Service Regulators, and Service Lines

Subpart I [§ 192.451 - § 192.493] - Subpart I—Requirements for Corrosion Control

Subpart J [§ 192.501 - § 192.517] - Subpart J—Test Requirements

Subpart K [§ 192.551 - § 192.557] - Subpart K—Uprating

Subpart L [§ 192.601 - § 192.636] - Subpart L—Operations

Subpart M [§ 192.701 - § 192.756] - Subpart M—Maintenance

Subpart N [§ 192.801 - § 192.809] - Subpart N—Qualification of Pipeline Personnel

Subpart O [§ 192.901 - § 192.951] - Subpart O—Gas Transmission Pipeline Integrity Management

Subpart P [§ 192.1001 - § 192.1015] - Subpart P—Gas Distribution Pipeline Integrity Management (IM)

Appendix Appendix A - Appendix A to Part 192 [Reserved]

Appendix Appendix B - Appendix B to Part 192—Qualification of Pipe and Components

Appendix Appendix C - Appendix C to Part 192—Qualification of Welders for Low Stress Level Pipe

Appendix Appendix D - Appendix D to Part 192—Criteria for Cathodic Protection and Determination of Measurements

Appendix Appendix E - Appendix E to Part 192—Guidance on Determining High Consequence Areas and on Carrying out Requirements in the Integrity Management Rule

Appendix Appendix F - Appendix F to Part 192—Criteria for Conducting Integrity Assessments Using Guided Wave Ultrasonic Testing (GWUT)