(a) It is unfair or deceptive to misrepresent the presence of gold or gold alloy in an industry product, or the quantity or karat fineness of gold or gold alloy contained in the product, or the karat fineness, thickness, weight ratio, or manner of application of any gold or gold alloy plating, covering, or coating on any surface of an industry product or part thereof.

(b) The following are examples of markings or descriptions that may be misleading: 24

(1) Use of the word “Gold” or any abbreviation, without qualification, to describe all or part of an industry product, including the surface layer of a coated product, which is not composed throughout of fine (24 karat) gold.

(2) Use of the word “Gold” or any abbreviation to describe all or part of an industry product (including the surface layer of a coated product) composed throughout of an alloy of gold (i.e., gold that is less than 24 karats), unless a correct designation of the karat fineness of the alloy immediately precedes the word “Gold” or its abbreviation, and such fineness designation is of at least equal conspicuousness.

(3) Use of the word “Gold” or any abbreviation to describe all or part of an industry product that is not composed throughout of gold or a gold alloy, but is surface-plated or coated with gold alloy, unless the word “Gold” or its abbreviation is adequately qualified to indicate that the product or part is only surface-plated.

(4) Marking, describing, or otherwise representing all or part of an industry product as being plated or coated with gold or gold alloy unless all significant surfaces of the product or part contain a plating or coating of gold or gold alloy that is of reasonable durability. 25

(5) Use of the term “Gold Plate,” “Gold Plated,” or any abbreviation to describe all or part of an industry product unless such product or part contains a surface-plating of gold alloy, applied by any process, which is of such thickness and extent of surface coverage that reasonable durability 26 is assured, and unless the term is immediately preceded by a correct designation of the karat fineness of the alloy that is of at least equal conspicuousness as the term used.

(6) Use of the terms “Gold Filled,” “Rolled Gold Plate,” “Rolled Gold Plated,” “Gold Overlay,” or any abbreviation to describe all or part of an industry product unless such product or part contains a surface-plating of gold alloy applied by a mechanical process and of such thickness and extent of surface coverage that reasonable durability 27 is assured, and unless the term is immediately preceded by a correct designation of the karat fineness of the alloy that is of at least equal conspicuousness as the term used.

(7) Use of the terms “Gold Plate,” “Gold Plated,” “Gold Filled,” “Rolled Gold Plate,” “Rolled Gold Plated,” “Gold Overlay,” or any abbreviation to describe a product in which the layer of gold plating has been covered with a base metal (such as nickel), which is covered with a thin wash of gold, unless there is a disclosure that the primary gold coating is covered with a base metal, which is gold washed.

(8) Use of the term “Gold Electroplate,” “Gold Electroplated,” or any abbreviation to describe all or part of an industry product unless such product or part is electroplated with gold or a gold alloy and such electroplating is of such karat fineness, thickness, and extent of surface coverage that reasonable durability 28 is assured, and unless the term is immediately preceded by a correct designation of the karat fineness of the alloy that is of at least equal conspicuousness as the term used.

(9) Use of any name, terminology, or other term to misrepresent that an industry product is equal or superior to, or different than, a known and established type of industry product with reference to its gold content or method of manufacture.

(c) The following are examples of markings and descriptions that are consistent with the principles described above:

(1) An industry product or part thereof, composed throughout of an alloy of gold may be marked and described as “Gold” when such word “Gold,” wherever appearing, is immediately preceded by a correct designation of the karat fineness of the alloy, and such karat designation is of equal conspicuousness as the word “Gold” (for example, “14 Karat Gold,” “14 K. Gold,” “14 Kt. Gold,” “9 Karat Gold,” or “9 Kt. Gold”). Such product may also be marked and described by a designation of the karat fineness of the gold alloy unaccompanied by the word “Gold” (for example, “14 Karat,” “14Kt.,” “14 K.,” or “9 K.”).

(2) An industry product or part thereof on which there has been affixed on all significant surfaces by soldering, brazing, welding, or other mechanical means a plating of gold alloy of not less than 10 karat fineness and of reasonable durability 29 may be marked or described as “Gold Plate,” “Gold Plated,” “Gold Overlay,” “Rolled Gold Plate,” “Rolled Gold Plated,” or an adequate abbreviation, when such plating constitutes at least 1/40th of the weight of the metal in the entire article and when the term is immediately preceded by a designation of the karat fineness of the plating which is of equal conspicuousness as the term used (for example, “14 Kt. Gold Overlay,” or “14K. R.G.P.”). When such plating constitutes at least 1/20th of the weight of the metal in the entire article, the term “Gold Filled” may be used. The terms “Gold Overlay,” “Rolled Gold Plate,” and “Rolled Gold Plated” may be used when the karat fineness designation is immediately preceded by a fraction accurately disclosing the portion of the weight of the metal in the entire article accounted for by the plating, and when such fraction is of equal conspicuousness as the term used (for example, “1/40th 12 Kt. Rolled Gold Plate” or “1/40 12 Kt. R.G.P.”).

(3) An industry product or part thereof on which there has been affixed on all significant surfaces by an electrolytic process an electroplating of gold, or of a gold alloy of not less than 10 karat fineness, which is of reasonable durability 30 and has a minimum thickness throughout equivalent to 0.175 microns (approximately 7/1,000,000ths of an inch) of fine gold, 31 may be marked or described as “Gold Plate,” “Gold Plated,” “Gold Electroplate” or “Gold Electroplated,” or so abbreviated, if the term is immediately preceded by a designation of the karat fineness of the plating which is of equal conspicuousness as the term used (e.g., “12 Karat Gold Electroplate” or “12K G.E.P.”). When the electroplating is of the minimum fineness specified above and of a minimum thickness throughout equivalent to two and one half (2 1/2) microns (or approximately 100/1,000,000ths of an inch) of fine gold, the marking or description may be “Heavy Gold Electroplate” or “Heavy Gold Electroplated.” When electroplatings qualify for the term “Gold Electroplate” (or “Gold Electroplated”), or the term “Heavy Gold Electroplate” (or “Heavy Gold Electroplated”), and have been applied by use of a particular kind of electrolytic process, the marking may be accompanied by identification of the process used, as for example, “Gold Electroplated (X Process)” or “Heavy Gold Electroplated (Y Process).”

(d) The provisions of this section relating to markings and descriptions of industry products and parts thereof are subject to the applicable tolerances of the National Stamping Act or any amendment thereof. 32