U.S. Code of Federal Regulations

Regulations most recently checked for updates: Aug 27, 2025

All TitlesTitle 16Chapter IIPart 1209Subpart A - Subpart A—The Standard
§ 1209.1 - Scope and application.
§ 1209.2 - Definitions and measurements.
§ 1209.3 - General requirements.
§ 1209.4 - Test procedures for determining settled density.
§ 1209.5 - Test procedures for corrosiveness.
§ 1209.6 - Test procedures for critical radiant flux.
§ 1209.7 - Test procedures for smoldering combustion.
§ 1209.8 - Procedure for calibration of radiation instrumentation.
§ 1209.9 - Labeling requirement.
§ 1209.10 - Certification and enforcement.
§ 1209.11 - Effective date.
Appendix - Figure 1 to Subpart A of Part 1209—Partial Insulation Preparation Apparatus
Appendix - Figure 2 to Subpart A of Part 1209—Cyclone Receiver Weldment
Appendix - Figure 3 to Subpart A of Part 1209—Flooring Radiant Tester Schematic Side Elevation
Appendix - Figure 4 to Subpart A of Part 1209—Flooring Radiant Panel Tester Schematic Low Flux End, Elevation
Appendix - Figure 5 to Subpart A of Part 1209—Zero Reference Point Related to Detecting Plane
Appendix - Figure 6 to Subpart A of Part 1209—Dummy Specimen in Specimen Holder
Appendix - Figure 7 to Subpart A of Part 1209—Specimen Tray
Appendix - Figure 8 to Subpart A of Part 1209—Standard Radiant Heat Energy Flux Profile
Appendix -
Appendix - Figure 10 to Subpart A of Part 1209—Insulation Radiant Panel Test Data Log Format
© 2016 GovRegs | About | Disclaimer | Privacy