- Start
- Prev
- Pg. 1 of 1
- Next
- End
Searching within:
All TitlesTitle 40Chapter IPart 1065 - PART 1065—ENGINE-TESTING PROCEDURES
Exit search mode at current location
Exit search mode at current location
section. Where we determine that your original submission does not include
. 1607, pages 347-354). Note that the equations were originally published to
analyzer will indicate the NOX in the original NO-in-N
All TitlesTitle 40Chapter IPart 1065Subpart E - Subpart E—Engine Selection, Preparation, and Maintenance
engine's original shipped configuration. If information on the most common and ..... original settings is not available, set the adjustable parameter in the middle
All TitlesTitle 40Chapter IPart 1065Subpart F - Subpart F—Performing an Emission Test Over Specified Duty Cycles
original reference duty cycle points generated as described in § 1065.512 to the ..... values match the original points generated in § 1065.512. The number of points ..... original reference duty cycle generated in § 1065.512. For example if the ..... original cycle has 1199 reference points at 1 Hz, then the regression will have
torque by another 5% of the original maximum test torque.
(D) If your ..... original maximum test torque, notify us and we will consider specifying a
- Start
- Prev
- Pg. 1 of 1
- Next
- End
