- Start
- Prev
- Pg. 1 of 1
- Next
- End
Searching within:
All TitlesTitle 46Chapter IPart 164 - PART 164—MATERIALS
Exit search mode at current location
Exit search mode at current location
All TitlesTitle 46Chapter IPart 164Subpart 164.009 - Subpart 164.009—Noncombustible Materials for Merchant Vessels
or tests to verify that the material is as stated in the original
All TitlesTitle 46Chapter IPart 164Subpart 164.019 - Subpart 164.019—Personal Flotation Device Components
similar to the original request for acceptance.
All TitlesTitle 46Chapter IPart 164Subpart 164.023 - Subpart 164.023—Thread for Personal Flotation Devices
times the original sample size.
(e) Manufacturer's production
.) shall be conducted. The time of failure shall not vary from the original ..... original test values by more than 10 percent.
181 °C. (325 °F.) above the original temperature at the end of 60 minutes
failure shall not vary from the original (2′ × 2′ furnace) test values by more ..... density and thickness shall not vary from the original test values by more than 10 percent.
All TitlesTitle 46Chapter IPart 164Subpart 164.015 - Subpart 164.015—Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shape
section. The test specimens shall be compressed 25% of the original thickness ..... = the original thickness.
hi = the thickness 24 ..... nearest 0.1 pound) by the original area of the cross section of the specimen
All TitlesTitle 46Chapter IPart 164Subpart 164.006 - Subpart 164.006—Deck Coverings for Merchant Vessels
to 250 degrees F. above the original temperature at the end of 15, 30, and
- Start
- Prev
- Pg. 1 of 1
- Next
- End
